Rear Subframe Bushings - BMW E30

¥14,200

These polyurethane bushings will stiffen the rear subframe. They are available in "stock height" to retain the stock suspension geometry or "12mm" to raise the subframe to correct severe negative camber by roughly 4 degrees.


Fits all BMW E30 models except the ix.


New top washers and Revshift bushing lube included.

 

Sold as a set
Lifetime warranty

* The 12mm riser bushings include differential studs and spacers for an additional $35. The diff spacers are necessary when raising the subframe.

Hardness
80A Street (Black): Slightly stiffer and stronger than OEM rubber. No increase in NVH. Great choice as an upgraded stock replacement (OEM+).
95A Track (Green): Significantly stiffer and stronger than OEM rubber. Noticeable increase in NVH. Excellent for enthusiastically driven street and track cars.
75D Drift (Teal): Drastically stiffer and stronger than OEM rubber. Moderate increase in NVH. Most commonly used on dedicated drift and track cars.
(NVH = noise, vibration, harmonics)
Learn more about choosing polyurethane here: https://revshift.com/pages/polyurethane

Please specify the hardness and subframe bushing height

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Raymond Khublal
Good quality and construction-note about e30 m3

FYI, I wish there was a note included that says if you have an e30 m3 you should re use the stock (thicker) washer instead of the one supplied. The stock e30 m3 washer adds a tiny bit more camber-unfortunately I didn’t realize until I already reinstalled the subframe.